Fully automatic one-end crimping,
one-end waterproof seal insertion,
both-end twisting, and one-end soldering machine
C556SZTS
Advanced model equipped with a tip waterproof seal insertion unit
- This model is based on the C550SZTS and is equipped with one waterproof seal insertion unit (DF-01) at the tip.
- CHA (automatic crimp height reproduction mechanism) is standard equipment.
- A collector with wire presence sensor (CN-4503B), terminal reel stand (RSB or URSB), and strip sensor (STS) are included as standard.
Product Specifications
| Product | |
|---|---|
| Model | C556SZTS |
| External dimensions | Width 1,120mm x Depth 765mm x Height 1,550mm |
| weight | 385kg |
| power supply | Single-phase AC 200V to 240V |
| Power consumption | 375Wh at rest, 878Wh at maximum |
| Air Source | 55â„“/min 5Mpa *Please use cleaning and drying air |
| Processing dimensions | |
|---|---|
| Tip setting value | 0.1 to 30 mm *2 |
| Rear end setting value | 0.1 to 30 mm *2 |
| Shortest processing dimension *1 | L4≧31mm (L4≧25mm with optional equipment) |
| Maximum cutting length | 99,999mm |
| Cutting tolerance *1 | Within ±(0.2+0.002×L)mm <L=cutting length> |
| processed wire rod | |
|---|---|
| Applicable wire diameter *1 | AWG#12 to AWG#32 (depending on wire material) |
| Applicable line type *1 | AV, AVS, AVSS, CAVUS, KV, KIV, UL, IV, Teflon wire, etc. |
*1. The above values may vary depending on the type of wire or terminal, and the wire supply conditions, so please test the wire beforehand.
*2. The total length of the front and rear ends must be 47 mm or less (excluding special processing).
Processing capacity (number of pieces processed per hour)
| full length | Number |
|---|---|
| 100mm | 1,780 bottles |
| 200mm | 1,750 bottles |
| 300mm | 1,730 bottles |
| 500mm | 1,680 bottles |
| 800mm | 1,600 bottles |
| 1,000mm | 1,580 bottles |
| 1,500mm | 1,510 bottles |
| 2,000mm | 1,440 bottles |
| 3,000mm | 1,320 bottles |
| 4,000mm | 1,220 bottles |
| 5,000mm | 1,140 bottles |
Processing conditions: Waterproof seal insertion depth: 20 mm, return depth after insertion: 2 mm, waterproof seal detection: Yes
*These are values measured by our company. Depending on the type of wire and terminals or other processing conditions, the values may be lower than those stated.