Fully automatic double-end crimping and
single-end waterproof seal insertion machine
C555SSA
A model based on the C551SSA that is equipped with one
waterproof seal insertion unit (DF-01) for one end.
Achieves 3,220 bottles/h (L=300).
- Standard equipment includes a collector with wire presence sensor (CN-4503B), terminal reel stand (RSB or URSB), signal tower, and strip sensor (STS).
Product Specifications
| Product | |
|---|---|
| Model | C555SSA |
| External dimensions | Width 1,090mm x Depth 1,500mm x Height 1,550mm |
| weight | 480kg |
| power supply | Single-phase AC 200V to 240V |
| Power consumption | 339Wh at rest, 945Wh at maximum |
| Air Source | 35ℓ/min 0.5Mpa *Please use clean, dry air. |
| Processing dimensions | |
|---|---|
| Tip setting value | 0.1 to 30 mm |
| Rear end setting value | 0.1 to 20 mm |
| Shortest processing dimension *1 | L2≧38mm |
| Maximum cutting length | 99,999mm |
| Cutting tolerance *1 | Within ±(0.2+0.002×L)mm <L=cutting length> |
| processed wire rod | |
|---|---|
| Applicable wire diameter *1 | AWG#12 to AWG#32 (depending on wire material) |
| Applicable line type *1 | AV, AVS, AVSS, CAVUS, KV, KIV, UL, IV, Teflon wire, etc. |
*1. The above values will vary depending on the type of wire or terminal and the wire supply conditions, so please perform test processing in advance.
Processing capacity (number of pieces processed per hour)
| full length | Number |
|---|---|
| 100mm | 3,220 bottles |
| 200mm | 3,220 bottles |
| 300mm | 3,220 bottles |
| 500mm | 3,100 bottles |
| 800mm | 2,950 bottles |
| 1,000mm | 2,870 bottles |
| 1,500mm | 2,690 bottles |
| 2,000mm | 2,530 bottles |
| 3,000mm | 2,270 bottles |
| 4,000mm | 2,060 bottles |
| 5,000mm | 1,880 bottles |
Processing conditions: Wire: 0.5 sq (AWG #20), Tip/Tail: 4.5 mm strip (crimped), Fine wire mode, Speed: 9, Wire diameter: 0.85 mm, Blade return: 0.2 mm, Grip position: 30 mm, Waterproof seal insertion depth: 20 mm, Return depth after insertion: 2 mm, Waterproof seal detection: Yes
*These are values measured by our company. Depending on the type of wire and terminal, or other processing conditions, the actual values may be lower than those stated.