High-speed fully automatic double-end crimping machine
C551HXG
Equipped with KODERA’s uniquely designed HX applicator.
New software
delivers excellent processing performance!
Incredible speed of over 10,000/h (L=100) .
- Equipped with KODERA’s uniquely designed HX applicator, it significantly reduces the time required for changeovers.
- A wide range of AWG sizes from #34 to #18.
- Crimp force monitor is included as standard.
- The main circuit board, control board, MDU, and power supply system have all been reconstructed.
- Additionally, the crimping machine has been strengthened to accommodate thicker wires and larger terminals.
- Aiming to make the machine user-friendly, it uses a large 10.4-inch full-color LCD touch panel that is easy to see and operate.
- Carrier dust and coating dust are separated, making it easy to see how much has accumulated.
- The palm-sized applicator and minimal body size contribute to space saving in factories.
- Consumable parts compatible with the previous C551HXA series.
- Standard equipment includes a terminal reel mechanism, paper winding mechanism (MGPR), a fine wire collector with wire presence sensor (CN-06-00), and a dedicated HXG conveyor (CC-60HX).
The crimper and die weigh an astonishing 200g in total. Its palm-sized design means you won’t have any trouble finding a place to store it.
The device stores data such as crimping settings, number of shots, and crimp force value, and simply attaches it to the main unit to complete the settings input, which was tedious with conventional applicators. All you have to do is enter the wire length and number of wires and press the start button.
Worn crimpers and anvils can also be easily replaced.
Product Specifications
| Product | |
|---|---|
| Model | C551HXG |
| External dimensions | Width 830mm x Depth 700mm x Height 1,230mm |
| weight | 220kg |
| power supply | Single-phase AC 100V to 240V |
| Power consumption | 255Wh at rest, 670Wh at maximum |
| Air Source | 10â„“/min 5Mpa *Please use clean, dry air. |
| Processing dimensions | |
|---|---|
| Tip setting value | 0.1 to 15 mm *2 |
| Rear end setting value | 0.1 to 10 mm |
| Shortest processing dimension *1 | L1≧63mm (with optional equipment, L1≧53mm) |
| Maximum cutting length | 99,999mm |
| Cutting tolerance *1 | Within ±(0.2+0.002×L)mm <L=cutting length> |
| processed wire rod | |
|---|---|
| Applicable wire diameter *1 | AWG#18 to AWG#34 (depending on wire material) |
| Applicable line type *1 | AV, AVS, AVSS, CAVUS, KV, KIV, UL, IV, Teflon wire, etc. |
*1. The above values may vary depending on the type of wire or terminal, and the wire supply conditions, so please perform a test process in advance.
*2. For wires over 7.1 mm, only semi-strip processing is possible.
Processing capacity (number of pieces processed per hour)
| full length | Number |
|---|---|
| 75mm | 10,680 bottles |
| 100mm | 10,340 bottles |
| 200mm | 9,390 bottles |
| 300mm | 8,690 bottles |
| 500mm | 7,570 bottles |
| 1,000mm | 5,250 bottles |
Processing conditions: Wire: UL1571 #30, Terminals (both ends): SSH-003T-P0.2, Speed: Standard, Discharge hold time: 0 seconds, Discharge position: Closest, Guide: Small, Wire core diameter: 0.32 mm, Blade return: 0.1 mm, CPD-06
*These are values measured by our company. Depending on the type of wire and terminal, or other processing conditions, the values may be lower than those stated.
Applicator production record (as of July 2023)
| Manufacturer | Over 90 companies |
| Terminal Type | Over 890 species |
| Number of units | Over 11,900 units |