Fully automatic one-end crimping,
both-end twisting, and one-end soldering machine
C550SZTS
A reliable multi-function soldering machine
- A model equipped with an automatic wire twisting machine (CASY-645) and soldering equipment.
- Freely adjust twist and solder. Simple, user-friendly operation.
- CHA (automatic crimp height reproduction mechanism) is included as standard. The crimp height is reproduced by reading from memory.
- This helps reduce changeover time for small-lot, multi-product production.
- A collector with wire presence sensor (CN-4503B) and a terminal reel stand (RSB or URSB) are included as standard.
Product Specifications
| Product | |
|---|---|
| Model | C550SZTS |
| External dimensions | Width 1,120mm x Depth 765mm x Height 1,550mm |
| weight | 355kg |
| power supply | Single-phase AC 200V to 240V |
| Power consumption | 527Wh at rest, 992Wh at maximum |
| Air Source | 45â„“/min 5Mpa *Please use cleaning and drying air |
| Processing dimensions | |
|---|---|
| Tip setting value | 0.1 to 30 mm *2 |
| Rear end setting value | 0.1 to 30 mm *2 |
| Shortest processing dimension *1 | L5≧31mm (with optional equipment, L5≧25mm) |
| Maximum cutting length | 99,999mm |
| Cutting tolerance *1 | Within ±(0.2+0.002×L)mm <L=cutting length> |
| processed wire rod | |
|---|---|
| Applicable wire diameter *1 | AWG#12 to AWG#32 (depending on wire material) |
| Applicable line type *1 | AV, AVS, AVSS, CAVUS, KV, KIV, UL, IV, Teflon wire, etc. |
*1. The above values may vary depending on the type of wire or terminal, and the wire supply conditions, so please test the wire beforehand.
*2. The total length of the front and rear ends must be 47 mm or less (excluding special processing).
Processing capacity (number of pieces processed per hour)
| full length | Number |
|---|---|
| 100mm | 4,740 bottles |
| 200mm | 4,400 bottles |
| 300mm | 4,050 bottles |
| 500mm | 3,450 bottles |
| 800mm | 2,950 bottles |
| 1,000mm | 2,650 bottles |
Processing conditions: Solder depth: ±0, Solder time: 0.1 seconds, Post-solder time: 0 seconds, Twist factor: 1, Chuck time: 0.08 seconds
*These are values measured by our company. Actual values may be lower than those stated depending on the type of wire and terminal, or other processing conditions.