Thick wire processing machine
C377G
100sq〜AWG#16(1.25sq)
Maximum outer diameter ⌀20mm
- Ultimate power potential.
- Compatible with wires from 100sq to 1.25sq (depending on the wire material).
- The power source is eight rollers, each driven by an independent motor. All four pairs of rollers open in both directions, so the path of the wire is always consistent regardless of the thickness of the wire. Furthermore, by opening and closing the rollers in both vertical and horizontal directions, damage to the wire being processed is minimized, allowing for consistently stable cutting and stripping.
- The AC power supply uses worldwide input, and the casters make it easy to move and set up.
- Supports 13 languages (Japanese, English, Simplified Chinese, Traditional Chinese, Korean, Turkish, Polish, Indonesian, Thai, Vietnamese (2 types), and Spanish (2 types)).
Product Specifications
| Product | |
|---|---|
| Model | C377G |
| External dimensions | Width 710mm x Depth 470mm x Height 1,400mm |
| weight | 156 kg |
| power supply | AC100V to AC240V (single phase) 50Hz/60Hz |
| Power consumption (100V) | 65W (rated) 191W (maximum) |
| Air Source | 8Nℓ/min 0.5MPa *1 |
| Processing dimensions | |
|---|---|
| Cutting length | 0.1mm to 99,999mm |
| Cutting Tolerance | ±(0.1+0.0005×L)mm *2 <L is the cutting length> |
| Strip Length | Tip 0.1~114mm, Rear end 0.1~99mm |
| Processable wire | |
|---|---|
| kinds | Battery cables, WL1, WL2, VSF, IV, KV, Teflon, glass wire, etc. |
| size | 100sq〜AWG#16(1.25sq) ※2 |
| Outer diameter size | Maximum ⌀20mm *2 |
| cutting peeling machine | |
|---|---|
| Wire Feed Speed | Variable |
| Blade material | Ultrafine particle alloy |
| power | Stepping motor, air cylinder |
*The specifications of this unit may be changed without notice for improvement purposes.
*1. Use clean, dry air.
*2. However, this depends on the wire material.
Processing capacity (number of pieces processed per hour)
| full length | Number (processing speed: 9) | Number (processing speed: 7) |
|---|---|---|
| 290mm | 740 bottles | 600 bottles |
| 500mm | 700 bottles | 570 bottles |
| 1,000mm | 630 bottles | 510 bottles |
| 2,000mm | 510 bottles | 420 bottles |
| 3,000mm | 430 bottles | 350 bottles |
| 5,000mm | 330 bottles | 270 bottles |
Processing conditions: Core diameter: 10mm, Blade return: 4mm, Stripping on both ends: 10mm
*These are values measured by our company. Depending on the type of wire or other processing conditions, the values may be lower than those stated.
Processing sample
