Fine wire processing machine
C370G
AWG#10(5.5sq)～AWG#32(0.03sq)
Maximum outer diameter ⌀6mm
- The control board and power supply system have been completely redesigned to reduce heat generation and improve reliability.
- Noise from the cooling fan has been reduced, improving quietness.
- Supports 13 languages (Japanese, English, Simplified Chinese, Traditional Chinese, Korean, Turkish, Polish, Indonesian, Thai, Vietnamese (2 types), and Spanish (2 types)).
- The input power supply is compatible with worldwide power supplies (AC100V to 240V).
- Added thick wire mode. *Reduces processing defects caused by incomplete stripping of insulation when processing thick wires.
- It is environmentally friendly with a maximum 15% reduction in power consumption. *Compared to C370A
- Standardized maintenance parts allow for long-term use with peace of mind (same as C370A).
Wire diameter input assistance function is included as standard
In addition to the number of processed pieces, the operating information can also display the operating time, number of cuts, and blade replacement notifications.
Product Specifications
| Product | |
|---|---|
| Model | C370G |
| External dimensions | Width 450mm x Depth 455mm x Height 295mm |
| weight | 30kg (including CN-03) |
| power supply | AC100V-240V (single phase) 50Hz/60Hz |
| Power consumption (100V) | 25Wh in standby, 125Wh in operation |
| Air Source | 7Nℓ/min ※1 |
| Processing dimensions | |
|---|---|
| Cutting length | 0.1mm to 99,999mm |
| Cutting Tolerance | ±(0.1+0.0005×L)mm *2 <L is the cutting length> |
| Strip Length | Tip 0.1~30mm, Rear end 0.1~30mm |
| Processable wire | |
|---|---|
| kinds | AVSS, VSF, IV, KV, UL, Teflon, glass wire, tube, etc. |
| size | AWG#10(5.5sq)～AWG#32(0.03sq) |
| Outer diameter size | Max ⌀6mm |
| cutting peeling machine | |
|---|---|
| Wire rod feed speed, cutting speed, stripping speed | Independently variable |
| Blade material | Ultrafine particle alloy |
| power | Stepping motor, air (used to remove coating residue) |
*The specifications of this unit may be changed without notice for improvement purposes.
*1. Use clean, dry air.
*2. However, this depends on the wire material.
Processing capacity (number of pieces processed per hour)
| full length | Number |
|---|---|
| 50mm | 10,700 bottles |
| 100mm | 10,000 bottles |
| 200mm | 8,800 bottles |
| 300mm | 8,200 bottles |
| 500mm | 7,300 bottles |
| 800mm | 6,200 bottles |
| 1,000mm | 5,700 bottles |
| 1,500mm | 4,700 bottles |
| 2,000mm | 4,000 bottles |
| 3,000mm | 3,000 bottles |
Processing conditions: Core diameter: 0.8 mm, Blade return: 0.2 mm, Stripping both ends: 3 mm, Processing speed: 9, Thin wire mode, Program G011
*These are values measured by our company. Depending on the type of wire or other processing conditions, the values may be lower than those stated.