Fully automatic double-end crimping and
double-end waterproof seal insertion machine
C558SSA
This model is based on the C551SSA and is equipped with two
waterproof seal insertion units (DF-01) on both ends.
Achieves 2,990 bottles/h (L=300).
- A collector with wire presence sensor (CN-4503B), terminal reel stand (RSB or URSB), and strip sensor (STS) are standard equipment.
Product Specifications
| Product | |
|---|---|
| Model | C558SSA |
| External dimensions | Width 1,090mm x Depth 1,500mm x Height 1,550mm |
| weight | 510kg |
| power supply | Single-phase AC 200V to 240V |
| Power consumption | 407Wh at rest, 1,000Wh at peak |
| Air Source | 45ℓ/min 0.5Mpa *Please use clean, dry air. |
| Processing dimensions | |
|---|---|
| Tip setting value | 0.1 to 30 mm |
| Rear end setting value | 0.1 to 20 mm |
| Shortest processing dimension *1 | L3≧44mm |
| Maximum cutting length | 99,999mm |
| Cutting tolerance *1 | Within ±(0.2+0.002×L)mm <L=cutting length> |
| processed wire rod | |
|---|---|
| Applicable wire diameter *1 | AWG#12 to AWG#32 (depending on wire material) |
| Applicable line type *1 | AV, AVS, AVSS, CAVUS, KV, KIV, UL, IV, Teflon wire, etc. |
*1. The above values will vary depending on the type of wire or terminal and the wire supply conditions, so please perform test processing in advance.
Processing capacity (number of pieces processed per hour)
| full length | Number |
|---|---|
| 100mm | 2,990 bottles |
| 200mm | 2,990 bottles |
| 300mm | 2,990 bottles |
| 500mm | 2,900 bottles |
| 800mm | 2,760 bottles |
| 1,000mm | 2,600 bottles |
| 1,500mm | 2,540 bottles |
| 2,000mm | 2,400 bottles |
| 3,000mm | 2,160 bottles |
| 4,000mm | 1,970 bottles |
| 5,000mm | 1,800 bottles |
Processing conditions: Wire: 0.5 sq (AWG #20), Tip/Tail: 4.5 mm strip (crimped), Fine wire mode, Speed: 9, Wire diameter: 0.85 mm, Blade return: 0.2 mm, Grip position: 30 mm, Waterproof seal insertion depth: 20 mm, Return depth after insertion: 2 mm, Waterproof seal detection: Yes
*These are values measured by our company. Depending on the type of wire and terminal, or other processing conditions, the actual values may be lower than those stated.