Long strip machine
C385A
AWG#7 (10 sq) to AWG#28 (0.08 sq)
Maximum outer diameter ⌀11mm
- Belt feed has evolved casting! More powerful and smoother for increased productivity!
- The wire is cut with a V-blade and stripped with a special circular blade that is matched to the wire, preventing damage to the internal wire.In addition, the wire is fed using a belt feed system, which allows it to grip uneven cables, such as cap-tire cables and shielded cables, with a surface that allows for stable length measurement.
- The air-controlled opening and closing of the belt feed can be done with a single touch of a switch on the operation panel.
By changing the position of the tip strip unit to be closer to the tip belt feed section, the ovality of the wires that tend to have stretchy coatings can be improved.
Product Specifications
| Product | |
|---|---|
| Model | C385A |
| External dimensions | Width 716mm x Depth 430mm x Height 266mm |
| weight | 44kg |
| power supply | AC100V or AC200V-240V (single phase) 50Hz/60Hz |
| Power consumption (100V) | 35W (rated) 139W (maximum) |
| Air Source | 6Nℓ/min 0.5MPa *1 |
| Processing dimensions | |
|---|---|
| Cutting length | 210mm to 99,999mm |
| Cutting Tolerance | ±(0.1+0.0005×L)mm *2 <L is the cutting length> |
| Strip Length | Front end: Maximum 1,500 mm (semi-strip required), Rear end: Maximum 210 mm (semi-strip required) *2 |
| Processable wire | |
|---|---|
| kinds | ABS wire, airbag wire, shielded wire, VSF, IV, KV, UL, Teflon, glass wire, etc. |
| size | AWG#7(10sq)～AWG#28(0.08sq) *2 |
| Outer diameter size | Maximum ⌀11mm *2 |
| cutting peeling machine | |
|---|---|
| Wire Feed Speed | Variable |
| Blade material | Ultrafine particle alloy |
| power | Stepping motor, air cylinder |
*The specifications of this unit may be changed without notice for improvement purposes.
*1. Use clean, dry air.
*2. However, this depends on the wire material.
Processing capacity (number of pieces processed per hour) [when strip length is long]
| full length | Number |
|---|---|
| 700mm | 891 bottles |
| 1,000mm | 769 bottles |
| 1,500mm | 628 bottles |
| 2,000mm | 530 bottles |
| 2,500mm | 458 bottles |
| 3,000mm | 405 bottles |
| 4,000mm | 327 bottles |
Processing conditions: Double-end stripping: 100 mm, semi-stripping: 50 mm, processing speed: 9, ON time: 0.1 seconds, OFF time: 0.1 seconds
*These are values measured by our company. Depending on the type of wire or other processing conditions, the values may be lower than those stated.
Processing capacity (number of pieces processed per hour) [when strip length is short]
| full length | Number |
|---|---|
| 500mm | 2,022 bottles |
| 1,000mm | 1,263 bottles |
| 1,500mm | 918 bottles |
| 2,000mm | 726 bottles |
| 2,500mm | 598 bottles |
| 3,000mm | 507 bottles |
Processing conditions: Double strip: 60 mm, semi-strip: 30 mm, processing speed: 9, ON time: 0.1 seconds, OFF time: 0.1 seconds
*These are values measured by our company. Depending on the type of wire or other processing conditions, the values may be lower than those stated.
Processing sample
