Corrugated tube cutting machine
C372A
Maximum outer diameter ⌀38mm
- An evolved corrugated tube cutter. It uses a flat blade guillotine method, resulting in a more beautiful cut on the tube.
- New guides have been added to the cutting section to hold the tube on both sides of the cutter, reducing tube bending.
- The cutting blade is made from a commercially available cutter knife blade (large blade), making it extremely economical.
Stable processing is achieved by using a guide plate that keeps the cracks in the cracked tube facing downwards.
Product Specifications
| Product | |
|---|---|
| Model | C372A |
| External dimensions | Width 430mm x Depth 465mm x Height 307mm |
| weight | 34kg (AC100) 47kg (AC100V~) |
| power supply | AC100V or AC200V-240V (single phase) 50Hz/60Hz |
| Power consumption (100V) | 78W (rated) 340W (maximum) |
| Air Source | 10Nℓ/min 0.5MPa *1 |
| Processing dimensions | |
|---|---|
| Cutting length | 0.1mm to 99,999mm |
| Processable tubes | |
|---|---|
| kinds | PVC tube, corrugated tube |
| Outer diameter size | Maximum ⌀38mm *2 |
| cutting peeling machine | |
|---|---|
| Tube Feed Speed | Variable |
| Blade material | alloy tool steel |
| power | Length measurement/stepping motor, blade/air cylinder |
*The specifications of this unit may be changed without notice for improvement purposes.
*1. Use clean, dry air.
*2. However, this depends on the wire material.
Processing capacity (number of pieces processed per hour)
| full length | Number |
|---|---|
| 50mm | 6,600 bottles |
| 100mm | 6,200 bottles |
| 500mm | 4,050 bottles |
| 1,000mm | 2,700 bottles |
| 2,000mm | 1,600 bottles |
Processing conditions: Corrugated tube outer diameter: ⌀11mm, F1 (roller speed): 7
*These are values measured by our company. Depending on the type of wire or other processing conditions, the values may be lower than those stated.
Processing sample
